T8 roll forming machine for wall/roofing panel, 1220mm input, low rib, wall panel roll forming machine
General Introduction of the roofing machine:
A trapezoidal sheet roll forming machine is a regular metal sheet roll former that produces metal roofing sheets or roof panels for both individual and industrial building.
The height of the profile is 8mm, the pitch is 115mm and the effective width is 1150mm, it is widely used in Russia/Vietnam and Myanmar for low roofing building
Quick Detail:
- Thickness : 0.4mm-0.8mm
- Material : PPGI, soft-full hard yield strength
- Input width : 1220mm
- Effective width: 1150mm
- Material weight : can design the un-coiler capacity as per request, normally 5Mt coil weight
- Coil inner diameter : 510mm
- Cutting tolerance : ±1mm
Machine list:
- Hydraulic de-coiler
- Roll former with 15mpm
- Hydraulic cutter
- Run out table or automatic stacking device
- Siemens PLC and IOP/ touch screen, Schneider brand inverter
Description/Technical Parameter details of complete line:
- 5TX1250mm Hydraulic Un-Coiler with/without coil car
The un-coiler capacity normally is 5MT, but we can provide as per the user’s request such as 6MT, 7MT, 8MT, 10MT
The driven motor also can be designed suitable with the roll forming speed 15mpm
- Entry Roller & Manual Pre-shearing device (Un-powered)
To cut off the end of the final piece of sheet only
Working thickness: max. 0.8mm
- Roll forming machine with cutting details as below table :
| Suitable roll forming material | Color steel sheet or galvanized steel sheet |
| Thickness | 0.4mm-0.8mm |
| Coil input width | 1220mm |
| Carriage Frame design | Wall-plate-frame-design /New-stand-frame-design |
| Rolling mills forming stages | 20 stages |
| Material of forming roller | 45# steel, CNC lathes, Hard Chrome Coated Option : with roller heat treatment |
| Shafts Diameter | Φ75mm |
| Main motor power | 5.5Kw/7.5Kw with reducer |
| Rolling speed of roll former | 18m/min (Higher speed is available, depends on the specification required by the buyer) |
| Hydraulic group power | 3.0 Kw |
| Material of cutting blade | Cr12, hear treatment/Cr12Mov, heat treatment |
| Electric Voltage Standard | 415V/50Hz/3Ph or as the customer's requirements |
| Major Color of Machine Painted | RAL 5015(Blue) or as per customer’s requirements |
Siemens brand PLC and touch screen, Schneider/ Shihlin/ Delta brand Inverter, Omron encoder
Cut-to-length tolerance≤±1mm
Control Voltage 24V
- Product Rack Un-powered, 3 units
Packing standard:
Nude cargoes for roll former, polythene wooden box for PLC control cabinet
Profile Drawing/Layout/Equipment reference pictures:
Product Tags:
|
|
T8 roll forming machine for wall/roofing panel, 1220mm input, low rib, wall panel roll forming machine Images
|
